It can be used with cameras, smartphones (supporting USB-C / Lightning), computers, etc. For Android, lOS, DSLR Camera system.

BOYAMIC 2 supports three output modes: Mono, Stereo, and Safety Track. M (Mono): Audio from two transmitters is combined into a single output track. S(Stereo): Audio from two transmitters is recorded to separate output channels. Ms (Safety Track): A secondary audio track is recorded at -12 dB as a backup to prevent distortion from unexpected loud sounds. *Post-production separation is required to use the safety track.

No, they are not compatible.

Using a 5V 2A charger at room temperature; Transmitter /Receiver: 2 hours via charging case. Charging Case: 2.5 hours.

BOYAMIC 2 supports pairing 2 transmitters with up to 4 receivers simultaneously. Note: Additional receivers require separate purchase.

Yes. When connected via adapter, use the receiver's USB-C port to charge both devices simultaneously.

Yes. Enable / disable playback via the receiver or BOYA Central app.

AI noise cancellation can be turned on / off via the transmitter, Adjust levels via the receiver or BOYA Central app. Strong Mode: Up to -40 dB noise cancellation. Light Mode: Up to -15 dB noise cancellation.

Yes. With default settings (48 kHz / 24-bit), it supports 14.5 hours of recording via its 8 GB storage.

Yes. Enable 32-bit float onboard recording via the receiver or app for up to 11 hours of recording.

984英尺（300公尺）（視線範圍內）。

設備已預先配對，可立即使用。手動配對：a. 自動配對：將發射器和接收器放入充電盒中。 b. 手動配對：在接收器上：進入「設定」>開啟「配對」。在發射器上：關閉電源。, 然後按住電源按鈕 5 秒鐘，直到藍色 LED 指示燈快速閃爍。當發射器的藍色 LED 指示燈常亮時，配對成功。