BOYA mini - 5g Wireless Microphone for Vlogging & Video

Q: 1. What devices is BOYA mini 2 compatible with?

It can be used with cameras, smartphones (supporting USB-C / lightning), computers, etc.

Q: 2. What are the output modes of the BOYA mini 2?

"BOYA mini 2 supports three output modes: Mono, Stereo, and Safety Track (selectable via the app).M (Mono): Audio from two transmitters is combined into a single output track.S (Stereo): Audio from two transmitters is recorded to separate output channels.Ms (Safety Track): A secondary audio track is recorded at -12 dB as a backup to prevent distortion from unexpected loud sounds. * Post-production separation is required to use the safety track.* Safety Track can only be enabled in Mono mode.* Stereo recording requires the connected device to support stereo input."

Q: 3. How to turn on or switch AI noise cancellation function of the BOYA mini 2？

Short press the transmitter’s button to toggle noise cancellation on or off. Adjust levels via the receiver or BOYA Central app.Strong Mode: Up to -40 dB noise cancellation.Light Mode: Up to -15 dB noise cancellation.

Q: 4. How many transmitters and receivers can BOYA mini 2 connect to at once?

BOYA mini 2 supports up to 2 transmitters connected to 1 receiver simultaneously.

Q: 5. What is BOYA mini 2's maximum transmission range?

Up to 100 meters in open environments.

Q: 6. If the TX does not charge automatically in the charging case:

1. Check if the insulating film on the TX charging contacts is removed. If not, remove it.2. Check if the charging case is low or out of power. If so, fully charge the case.Note: If the case is not charging and the indicator blinks red or stays off when TX is placed inside, the case is low on power.3. Clean the case's pogo pins and TX contacts.4. Swap TX positions to test.（1）If only one position fails, the case is faulty.（2）If one TX fails in both positions, that TX is faulty.5. Check magnet strength. Place TX in the case and press it down with your finger. If it charges, the magnets may be weak.Use a metal object to verify which part is faulty.6. If none of the above works, the case or TX may need repair.

Q: 7. If TX and RX fail to pair:

1. Press and hold TX power button for 2s to turn off, then turn on. Reconnect RX to device and check for auto connection.Note: Solid blue/green light = connection successful.2. If no auto connection, pair manually:（1）Insert RX into device, press and hold NR button for 5s until blue light flashes quickly release. RX enters pairing mode.Note: RX pairing mode sequence: slow blue flash > fast blue flash.（2）With TX off, press and hold power button for 5s until blue light flashes quickly release. TX enters pairing mode.Note: TX pairing mode sequence: off slow blue flash fast blue flash.（3）TX and RX will pair within 10s. Both indicators show solid blue.3. If issue persists, TX or RX may need repair.

Q: 8. If your phone or computer cannot recognize BOYA mini:

1. Android: Check connection stability (remove phone case if loose). Some brands (VIVo, OPPo) require OTG function enabled in settings; Huawei phones need USB debugging turned on.2. iPhone: Check if RX receiver indicator lights up and phone screen is on. iPhone powers the device only when screen is on and recording app is open.3. Computer: Go to system sound settings and check if BOYA mini microphone is selected as input device.4. If issue persists, product may be faulty or incompatible and requires repair.

Q: 9. If audio recorded with BOYA mini cuts in and out:

1. Ensure there are no high-power Wi-Fi routers or wireless devices nearby causing interference. If unavoidable, adjust distance and angle.2. As the 2.4 GHz spectrum is prone to interference, avoid obstacles like walls and stay away from devices operating at 2.4 GHz (e.g., high-power Wi-Fi antennas, radios).3. Check if the receiver is loose; unplug and reinsert it.4. Ifinterference is uncertain,test in an interference-free environment. If recording is normal, the product is functioning properly.

Q: 10. BOYA mini noise cancellation not working or ineffective:

1. Check if TX noise cancellation is enabled. After TX and RX connect (solid blue light, short press TX power button. Solid green light indicates noise cancellation is on.2. Short press the RX NR button to cycle through noise cancellation levels: Level 1 (ow, green light flashes once),Level 2 (medium, flashes twice), Level 3 (high, flashes three times).3. In extremely noisy environments where ambient noise overpowers the speaker's voice, noise cancellation may not completely eliminate background noise.4. If when TX and RX are connected normally, a short press on the TX power button cannot urn noise cancellation on/off (indicator does not switch between green and blue), or a short press on the RX NR button cannot switch levels (indicator does not flash. the unit may be faulty and require repair.

Mic ≤ 5g

Thumb-Sized Still

48 kHz
/24-bit

80 dB SNR

120 dB SPL

Aerospace-grade Vacuum Plating

True AI Noise Cancellation

Strong & Light Mode

BOYA mini 2

Noise Cancellation Evolution

Battery Life

Mic: 6-Hr Total: 30-Hr

Limiter & Safety Track

Double Distortion Protection

Premium Design

Dive into the Mini

Weighing in at a mere 5 grams - the same as two pennies - the BOYA mini 2 is the lightest and most compact microphone you can get. Its streamlined design seamlessly blends with your clothing for complete concealment and all-day comfort.

Immersive Sound

True AI Noise Cancellation

Powered by BOYA Intelligence, BOYA mini 2 dynamically reduces surrounding noise while keeping your voice clear and natural. Trained on over 700,000 real-world noise samples and 20,000+ hours of deep learning, it delivers fast, precise noise cancellation in changing environments.

-40 dB | Active Outdoor

80 dB | Streaming

48 kHz / 24-bit Resolution

Enjoy AI noise cancellation with just a single press on the transmitter or receiver. Activate strong mode for up to -40 dB suppression in loud environments, or switch to light mode for up to -15 dB, reducing white noise while preserving natural ambience.

.sit-media { opacity: 1 !important; transform: none !important; } .sit-text { opacity: 1 !important; transform: translate3d(var(--sit-content-anchor-x, -50%), var(--sit-content-anchor-y, -50%), 0) !important; } .sit-mask { opacity: 1 !important; visibility: visible !important; }

Capture Every Detail. Elevated.

With a wide 20 Hz - 20 kHz frequency response, BOYA mini 2 captures clear, detailed sound. The built-in low-cut filter reduces unwanted low-frequency noise, while the foam windshield helps keep recordings clean and focused.

.iphone-animate-hidden, .iphone-menu-reveal-pending { opacity: 1 !important; transform: none !important; } .iphone-menu-pending .menu-wrap { visibility: visible !important; }

Designed for Less Distortion. The BOYA mini 2 features an automatic limiter that controls sudden audio peaks in real time to help reduce distortion and clipping. A -12 dB safety track provides a lower-level backup for added recording protection.

120 dB Sound Pressure Level. From whispers to powerful vocals, BOYA mini 2 handles a wide dynamic range with ease. Its 120 dB SPL capability prevents distortion, keeping your sound pure even at high volumes.

Powerful Features. Easy to Use.

Mute in a Double Tap

Mute your mic with a quick double-press on the receiver or directly in the app. Get instant privacy and full control without stopping your recording or breaking your flow.

One-Tap Noise Reduction

Press the NR button on the receiver once to instantly reduce background noise and keep your voice clearer—no app or complicated setup required.

Power On. Pair Automatically.

No manual pairing or complicated setup. The transmitter and receiver connect automatically when powered on, so you can plug in, start recording, and capture the moment in seconds.

Play Back Instantly, No Unplugging Needed

Review your recordings right away without removing the receiver from your phone. Keep your setup connected, check your audio in seconds, and move straight into the next take without interrupting your workflow.

.iphone-animate-hidden, .iphone-menu-reveal-pending { opacity: 1 !important; transform: none !important; } .iphone-menu-pending .menu-wrap { visibility: visible !important; }

Smart App Control. Use BOYA Central to adjust gain, EQ, noise reduction, and other recording settings directly from your smartphone for faster, more flexible audio control.

6-Level Gain Control. Adjust gain across 6 levels in BOYA Central to match different voices and recording environments for more balanced, consistent audio.

3 EQ Modes for Your Sound. Choose Vocal Boost, Low Cut, or Custom EQ in BOYA Central to enhance voice clarity, reduce low-frequency noise, and fine-tune your sound with less post-editing.

Flexible Mono & Stereo Recording. Choose Mono for a combined audio track or Stereo to keep each channel separate, giving you greater flexibility to balance, edit, and mix voices in post-production.

All-day Creativity

Long-Lasting Battery Life

Each transmitter delivers up to 6 hours on a single charge and up to 30 hours with the charging case - keeping you powered far longer before battery anxiety ever sets in.

6 H

Each Mic

30 H

Total Battery Life with Case

Freedom

328 ft Stable Wireless Transmission

Enjoy reliable, crystal-clear audio from up to 328 ft (100 m) away in open, unobstructed environments, giving you more freedom to move while recording.

Compatibility

Connect with Confidence

Compatible with iPhone, Samsung, Xiaomi, Huawei, iPad, laptops, tablets, DJI Action 2/3/4, Pocket 3, and most other USB-C devices for easy plug-and-record use.

Note: Requires USB-C audio support. Enable OTG on Android if needed. Remove thick phone cases for a secure connection. Not compatible with Insta360, GoPro, or OnePlus.